I purchased two HP TouchPads a few years ago when they were fairly inexpensive. I wanted a larger tablet that wasn’t built cheaply. They worked great for a while but started to act up. I used them less and less until they just stopped working all together. I put them on a shelf and forgot about the for quite a while.
A buddy of mine who is still seemingly a huge fan of the HP TouchPad diagnosed that one had a main board and battery failure while the other just a battery failure. I put them back on the shelf and that is where they sat, once again. He followed up with me wondering if I bought a battery yet (keeping me accountable) to which I did not. He told me he had an extra battery and dropped it off along with the needed tools to disassemble and make the repair.
The guide I looked at made it seem like it would be easy to take the tablet apart, just work your way along the sides, as described and carefully separate the two halves. What seemed to be missing from the article was that you have to shim the screen from the backing to keep it from clipping itself back shut again.
Once the tablet was apart, I disconnected the halves and started the process of removing more pieces until I could get the battery out. I only ended up taking out 3 of the internal components.
Upon removing the USB board, I noticed that one of the wires for the little vibrator motor had somehow broken free from the board. A fine explanation for why this unit didn’t have haptic feedback. Thankfully, my soldiering skills were adequate enough to correct the issue.
There were only 4 screws retained the battery and it should be noted that once the screws have been removed, the battery will not come out easily as it is also adhered to the device. Very careful and slow removal of the battery was warranted as I learned my lesson about removing a lithium polymer battery years ago on another project. I didn’t want to rupture the sells and have a little fire or at least lots of heat and smoke.
Once I freed the battery from the case, I noticed that I could take a shortcut and remove the battery without disassembling all of the components as outlined in the guide. I freed the battery from it’s compartment, set it aside, took the new battery and using a flat tipped screwdriver, was able to insert the connector of the new battery into the board and fasten it to the tablet body. I effectively skipped the last 15 steps of the guide I used and reassembled it.
Success… but it didn’t turn on.
I figured that the thing needed to be charged so I let it charge overnight. It still didn’t turn on and I felt obligated to let my buddy know that this TouchPad is dead and asked if he wanted the battery back. Then, he asked if I did the hard reboot, hold power and volume down for 30 seconds.
I did just that and immediately it went to the ClockworkMod boot loader menu. I selected the CyanogenMod image already installed on this TouchPad and I was very pleased to see that it was fully functional.
Since I wasn’t going to leave this with a 2 year old version of Android on it, I began my search for an updated ROM. There are several options out there and some of the newer versions of Android seem to have Bluetooth or camera issues. I didn’t want to have any hardware issues so I ended up going with this version here. Everything works but it is an older version of Android with security patch updates.
Another requirement I made is that I wanted to ensure that there were no Google Services on this tablet as I didn’t want to weigh it down with all the data scraping and mining services. All I want from this tablet is to do causal web browsing, reading ebook and PDF documents so there is no need to install the Gapps package. I also wanted to see how useful a simple de-Googled tablet would be.
Since I did want to have access to applications on this device, I installed F-Droid. F-Droid is similar to the Play Store, an available catalog of FOSS (Free and Open Source Software) Android applications. Most of the applications I want to run are available there and anything else it is possible for me to sideload or install using Yalp.
The applications I installed:
- KDE Connect
- Fennec F-Droid, a Mozilla based web browser
- Barcode Scanner
- Book Reader
- Yalp, allows you to download apps directly from Google Play Store as apk files.
Installed Using Yalp:
- ASTRO File Manager
Modifications to improve my usage experience
I turned off the KDE Connect Telegram Notification. Not because I don’t like Telegram but because I don’t want multiple notifications on my Desktop Linux machine for the same message.
To do so, withing the KDE Connect Application on the paired device Menu > Plugin settings > Notification sync configure button, scrolled down to Telegram and uncheck it.
Next, I made the KDE Connect Keyboard an input option by going into System Settings > Language & Input and checked KDE Connect Remote Keyboard
I set up a folder on the Tablet called Sync and using Syncthing have it tied to two of my openSUSE desktop Linux machines. It is an easy and efficient drag and drop method of putting files on the tablet instead of using KDE Connect. I figure, more options are better than fewer options for sharing data.
Using Dolphin in KDE Plasma to drag and drop files right on the HP TouchPad file system is such a fantastic feature. This, combined with having a folder that I can use to sync between all my systems and a shared clipboard gives me the truly practical form of desktop/mobile convergence.
What I like
The size of this tablet is perfect for how I intend on using it. I can check things, look up things, and use it for accessing references in either PDF, ebook or my favorite resource, the openSUSE Wiki. To copy and paste from the tablet is made super easy, thanks to KDE Conenct. Copy on the tablet, paste on the Desktop. This tablet has such a nice weight and feel about and the protective folio-style case is great. I have all the functions and features I need to do what I set out with this 2011 built tablet. Sure, it is old and well past a tablet end of life but it is fast, very snappy and responsive.
What I Don’t Like
I have an outdated version of Android but with the security patches back-ported though, I do like the dark look of the older Android UI, so lets call this point a wash. The downside is, it doesn’t allow for certain newer KDE Connect features as noted here by one of the developers.
I also may have done something to disconnect the internal speakers as I don’t hear sound unless I plug into the headphone jack or Bluetooth speaker. I am not really using this for multimedia and the workaround is satisfactory.
I am not a fan of the rear facing only camera on the tablet. It also distorts the image during the “live view” but the picture itself has the proper aspect ratio. Unless if I want too take some awkward selfies, I don’t see this as a terrible issue.
I am very glad to have a working HP TouchPad once again. Is it indeed limited but I am not using it like a brand new tablet, I am using it closer to how a tablet was used 7 years ago. I am also not using this tablet like I would a proper computer as that would require a keyboard and mouse and once I have added those items, I may as well use a laptop. This fantastic little device does just what I want it to do, superbly.
Using KDE Connect and Syncthing, I can have the proper mobile/desktop convergence with my openSUSE Linux desktops in a highly practical manner anywhere I go, without the need for a third party service.
I am not sure what I will do with the other tablet now. This one is just so great, I might have to get the other one working just to keep in my cubicle. Would I recommend this tablet to someone else? For most people, probably not, unless they like to noodle around with technology. Was it worth taking the time to fix it? Also, probably not but the satisfaction for me out of making this older yet perfectly usable hardware functional once again makes it more than worth the time and effort.