Outside of the Linux thing and retro tech hobbies of mine, I like to build things and generally improve my domicile so I enjoy tools, especially cordless power tools. Not having that tether to the wall has a kind of freedom to it that makes working with your hands much more enjoyable. I have been using cordless tools in the form of the Porter Cable 18 volt line for about 10 years. It has been a fantastic platform of cordless tools but unfortunately, it was the decision by the company to abandon the 18 volt line and move to this 20 volt Max line without an upgrade path. I stuck with the Porter-Cable tools for quite a while but in the last year or so, the batteries were all giving out. No batteries were available in the stores anymore so I bought some knock off batteries on eBay. I had to repair both of them after using them due to a manufacturing flaw but that was the deciding factor that I could not continue to stay with the Porter-Cable 18v line of tools.
Did a lot of research online, wanted to hear harsh opinions of all of the tools, read or watch anything that told me the good and the bad with every aspect I could fine. I wanted a tool I could afford but one I could rely on with a broad selection of tools and a non-restrictive technology. I wanted to have some level of trust for the intentions and motivations of the company that owns the brand. After all of my searching, studying and evaluating each of the value propositions, I landed on DeWALT.
How I ended up on this decision. Keep in mind, this is an evaluation of what I value that works best for me. This is not universal to all people, nor should you take this as a recommendation that works best for you. You will have to determine this for yourself using your own value proposition wheel.
I need tools that will handle my level of abuse. I do try to be careful with them and I do keep them clean but I am not exactly good at preventing me from happening to my things. I am prone to drop, kick, knock off high places and so forth my power tools. I need things that can survive my usage. Based on my contractor friends’ preferences. DeWALT tends to be their preference. Though, my plumber friends tend to go Milwaukee for some of their plumbing specific tools, I don’t have Milwaukee money.
Variety of Tools
The next most important aspect of my choice was to have a large variety of tools to remove complexity in accomplishing tasks in my life. My time is limited and I need to maximize efficiency whenever possible (side note, much of the reason I use Linux and specifically openSUSE but that is another discussion for another time). Suffice to say, I want options, lots of options and DeWALT has the best score here for my preferences. I also want the ability to use easily use batteries with other tool platforms (supported or not). Since DeWALT is a popular platform, there are many hacks out there so that is also a big win.
It was a absolutely a necessary requirement to have options for large capacity batteries for higher draw tools. I don’t like extension cords. Sure, that is the universal power source but it is also very inconvenient and I tend to mangle my extension cords over time. In this are, DeWALT really fit the bill. Not only do they have their 20 volt Max line with 6 Amp Hour batteries but they also have batteries that will flip to 60 volts (actually 54v nominal) for a chain saw, table saw, and a miter saw. These vast options bolstered my decision to go with the 20 volt Max platform.
As an aside, Makita cordless tools batteries had the high capacities but should I choose to refurbish them with new cells, they would no longer function. This would not work for me. Milwaukee arguably have the best battery in the business and the price reflects it.
Commitment of Long Term Support
My experience with the 18 Volt Porter-Cable line was good, but within 4 years they started their transition to the 20 Volt Max along with their DeWALT and Black & Decker counter parts. Unlike DeWALT, there was no provided upgrade path. Had I bought into DeWALT 18 volt line years ago, I could have upgraded batteries over time and slowly transitioning to the 20 Volt Max line. I wanted to have some kind of corporate commitment or at least the perceived commitment that I would be able to use these tools for many, many years. Based on the rate of expansion of the tool line, there is some sort of engineering and product development commitment and therefore, it is likely to be around for a while.
Based on these three bits of criteria plus the bonus if it being “manufactured in the USA with globally sourced materials” I decided that DeWALT would be my best decision. It hit with the highest marks on all parts.
The First Purchase
I was at Lowe’s to get materials for a project and I saw there was special on DeWALT Tools. What cought my eye was a 10-pc tools set, last one and when I did the math, I would spend less than $60 per tool, factoring the two batteries and charger, it appeared to be a spectacular deal for DeWALT. Buying so many, tools at once meant I could completely change over my cordless platform. I am not going to give a full review on each component, just the highlights and drawbacks.
This model has brushed motor, feels good in the hand, slightly smaller, faster and more powerful than the 10 year old Porter-Cable 18v cordless drill. A nice feature of it is the work light in the front turns off after approximately 20 seconds after you release the trigger.
The anti-feature of this drill is the speed selector switch is a bit ropey. The one and only feature that is lack luster. This would have been a top-of-the-line drill 10 years ago but today, there are many better options.
This model has a brushed motor and is much more compact than the Porter-Cable 18v equivalent model. The 3-LED front work light with similar delayed turn off feature makes this fantastic for working in dimly lit areas, which seem to be the work environment I end up more frequently than not.
The anti-feature of this is that although more compact than what I have been used to, not as much as I have seen and a brushless motor would be nice, even if not necessary.
This is the larger, brushed motor model, feels beefy in the heads and is a bit weightier than the Porter-Cable 18v unit it was replacing. It looks and feels like it will take more of a beating than it is likely to get in my possession.
The anti-feature is that it is longer and heavier than what I would like but it’s really not worth complaining about as this isn’t a tool for which I am likely to put a ton of hours.
This is the brushed motor model with the 6-½” blade. It is well balance and the over all use and feel of it is quite satisfactory. This has seen many linear foot of wood travel past it’s spinning teeth. Since I have used it quite a lot I can confirm that it does the job very well.
The Anti-Features of this tools is that the chips from cutting wood somehow seem to jump into my face more than my previous Porter-Cable model, it also lacks a laser guide and a 7-¼” blade would have been preferred. This also does not have a laser guide like you would see on some brands as standard.
This tool is very similar to the Porter-Cable 18v unit it has replaced. Although I haven’t heavily used this tool, it has chewed through many pipes and nails. I like how the design of the tool has a built in hand guard.
The anti-feature is that it has a slightly slower maximum rotational speed (RPMs) than my previous cordless unit but it seems to perform similarly. No complaints here.
Oscillating Multi-tool, XR model
This is the brushless motor model and at first, I didn’t like the trigger vs switch as compared to the Porter-Cable equivalent. After actually using it, I found that the trigger with the lock was more ergonomic and ultimately easier to use. It also has a very bright work light in the front with a similar delayed shut off.
Anti-feature, the learning curve for this different switch mechanism but I wouldn’t change this.
I have used this for numerous functions around the house besides blowing sawdust off of my projects. It’s great for clearing the driveway and the front porch. I have also used it to inflate an air mattress or exercise ball more than once. It isn’t loud and painful on the ears like some air pumps.
Anti-features, it could be more powerful and have a longer nozzle attachment but that would likely put it in another class of blower so I will not complain about this either.
This could almost be my favorite tool in the pack and it is the one that gets used nearly every day. I have found that this vacuum is not only great for cleaning up your work, the tools after getting them dirty but also great for quick cleanups around the house and in my truck. The detachable hose makes it very useful for cleaning up dust bunnies in corners, or on ceiling fan blades and when paired with round brush attachment makes quick work of cobwebs between the floor joists or cleaning underneath the couch cushions. It should also be noted that this is a wet/dry vacuum, of which I have used it for both.
Anti-feature, it could suck with a bit more force but considering the size of it, I believe it to be adequate.
It’s a nice portable speaker that I pair with my computer, usually my Dell Latitude E6440 and listen to podcasts while I work around the house. The KDE Plasma Bluetooth module had no issues pairing and remember this device (the Linux tie-in). I find that this one gets a lot of use too. Also, with the Plasma Media Integration, starting and stopping the podcast or YouTube video playing on Firefox worked perfectly. Additionally, I could use my phone to stop the media playback using KDE Connect. Pretty fantastic.
Anti-feature, it could be louder.
Frequently, this is considered the “throw off” or “sandbag” item, and I can agree to that with some sets but this is a nice flashlight and also gets a lot of use, mostly by my kids. The pivoting head is great for setting it in a particular direction to light up your work.
Anti-feature, it could be brighter or have an adjustable focus.
These are not DeWALT’s finest tools by a long shot but spending about $60 per tool, I would say that it was quite worth it. Admittedly, the flashlight isn’t worth $60 but as a package deal, very worth it. There really is only one tool for which I am not completely satisfied and that would be the drill. I knew this going into it and I wasn’t about to drop the coin on having a set that consisted of nothing but the top of the line XR tools as I don’t use them enough to warrant that.
Tools that I like most in the set
Impact Driver – The key feature of the impact driver I like most is how compact it is and the three LEDs on the front of it. It feels good in the hand when pared with a 5 cell battery and spectacularly drives screws into stubborn materials.
Vacuum – Although not exactly a tool someone is likely to seek out, this is the tool that gets the most use in my house, day in and day out. It is a wet dry vacuum that really sucks. I have used it more for cleaning dust bunnies, crumbs and floor dirt than anything else but with the hose being an integral part of the tool, makes this fantastic for quickly cleaning up the messes of life. This has done more to simplify and improve efficiency of my life than any of the other tools in the group.
Blower – As odd as it may sound, this cheap tool has been used a lot. Everything from blowing leaves, cleaning grass off the sidewalks to inflating exercise balls (darn thing had a leak).
Tools I Don’t Like as Much
It is not that I am disappointed with anything it is just to give an honest bottom three in this 10 piece tool set ranked from least to most disappointing.
The Reciprocating Saw is fine, very powerful and also quite heavy. It is better than the 18 volt Porter-Cable model I had but also, having held the XR line of more compact Reciprocating Saws by DeWALT makes this one feel a lot more like last decades technology.
The Circular Saw, it’s really quite decent but it as such that I feel like I get hit in the face with wood chips / dust more often because the saw blade and motor are opposite to what I am most accustomed. Also, it is a 6 ½” blade as opposed to the 7 ¼” blade that is standard on typical corded circular saws. This saw feels a lot like the 18 Volt Porter-Cable but a mirrored version of it.
The drill, although not bad and better than the Porter-Cable Drill that I loved so dearly for a decade is probably the least thrilling of the bunch. I only say this because of the XR line of brushless cordless drills available. Those are something special, this is just, meh.
Of these bottom three, the drill needs to be upgraded for me to be happy with the tool set. I could get along fine with this drill but I would rather move this drill into the kitchen as a hand mixer and have a better compact XR drill for making and fixing things.
Amendment to Cordless System
This is just may be me, but the cornerstone tool of any kit is the drill and before I actually left the store, I had already made up my mind that I needed to get a second drill anyway. The drill I ended up purchasing, on eBay, was the DeWALT DCD791, a part of the XR Line with an extremely bright work light light on it, just above the battery. There are three settings to the work light. Dim, Bright and super bright. The “Super Bright” also has 20 minute delay on it so you can pull the trigger. set the drill down and brighten the dim corner you are working for quite a while. This is super, super handy. No regrets on that $80 purchase.
The second tool that I also needed to have the tool set complete enough for my next series of tasks was a hammer drill. I ended up getting this DCD996 Hammer Drill. My mistake that I made was purchasing it without the side handle. The performance of it is to my satisfaction and it too has that very handy three setting light system. In a pinch, you can set these drills up around you to brighten something up.
Also purchased two, 4 Amp Hour batteries because the two, 2 Amp Hour batteries were not sufficient. Lowe’s also had a buy one get one deal going so I purchased another charger with a 3 Amp Hour battery.
I found that I was ripping through batteries pretty quickly with only having two, 2 Amp Hour batteries. Having the additional batteries made it possible to always have at least one charged and ready to go and one sitting in the vacuum.
Where to from here
This was the first phase in my goal for simplification for my project tasks. Not just for fixing, building and making but also for general operation to include cleaning and maintaining my domicile. Little things like a vacuum at the ready with batteries in reserve has made my life a lot better. The next steps were to replace my aging 18v Line of Black and Decker outdoor tools as well as replace my mower with a DeWALT cordless variety.
See this article on DeWalt 20v Max Cordless Router
There have been many times when I have made purchases that I have regretted shortly after. That is not the case at all with this 10 piece tool set. After selling off my old tools the difference would have been about the coast of new batteries. Surprisingly, 10 year old cordless tools hold their value pretty well.
I am very glad I purchased a few extra batteries as it allows me to rotate through and always have a battery on hand. I have subsequently put in several hours of use on each of the tools I have briefly described here. They have all performed to my satisfaction, even the lack-luster drill has been used pretty heavily. I have made several mean pots of mashed potatoes with it.
I am not sure where I am going to go from here. I have no intention of doing any work to failure videos or tests as there is no way I would get any value out of that. I may focus on more interesting tools at a later date on if it suites me. I can guarantee that some of these above will make cameo appearances on future things as they are very often in supporting roles.
Tools are very much a necessity in many, many aspects. They are force-multipliers in chores and tasks which consequently make life more efficient and help to make my time in this fallen world a bit more enjoyable. A quality tool is never (maybe rarely) a wasted purchase and from what I can tell, I have purchased quality tools that have, so far, held up quite nicely.
Lowe’s 10 pc tool set product information
KDE Connect Article on CubicleNate.com
7 thoughts on “Outside the Cubicle | DeWALT 20v Max Cordless Tool Platform”
Great Article. I too have both a Linux background and have moved to DeWalt 20v power tools. The item that’s bothering me with this set is the lack of an adapter to turn cordless into corded when working in the shop. Any leads on that?
I think the 120v circles miter saw has such a thing but I don’t think the other 20v or 60v tools have such a thing. Truly, as much as I use my 20v tools, I don’t go through a lot of batteries so that need hasn’t come up.