I purchased a medium of the road Bluedio headset that I have been using in both Bluetooth and wired modes. It’s pretty decent and they fit my head well. Unfortunately, my Magilla Guerrilla handling of it I snapped the headband. I didn’t think I was being rough with it but I do have a track record of such things. The break was on the left side near the slide out adjustment and although the set was still wearable, it felt like one ear cushion loose enough that it would slap the side of my head at every turn.
I had three choices, buy new headphones, deal with it and get used to the gentle paddling of my left ear or lastly, fix it and see if I can return it to an acceptable, usable condition. The paddling was completely unacceptable to live with and the the headphones would no longer fit snugly to my head so this option was ruled out. The option to buy something new was also out. My budget had already been allocated and I am not interested in getting new hardware when these were still electronically functional. Why wouldn’t I at least attempt a repair?
The padded headband was well stitched together in such a way that the stitching was easy to delicately remove. This exposed the poly-carbonate (I am assuming) structuring beneath.
Looking at it, the fix wouldn’t be difficult at all to do it, with the right combination of adhesive chemicals: Loctite 444 Ethyl cyanoacrylate liquid adhesive along with Loctite SF 7452 cure-speed accelerator for the aforementioned adhesive.
The nice thing about the accelerator (a trick I learned at work), you can add adhesive and immediately follow it with the accelerator to layer on material and consequently, greatly increase the strength. This was a technique demonstrated when I fixed my broken Porter-Cable Drill some time ago.
Just a few minutes of gluing and applying the celebrator, had extended the life of this headphone set. Would a normal upgrade to something new and better? Probably but that is just not how I roll. I can’t bring myself to toss out something that is easily repaired. I have yet to sew the padded headband back together but I am no longer getting paddled by the ear pad and when I do handstands, they don’t fall off of my head.
This is not an advertisement for Henkel but fixing toys or equipment is easily accessible to just about anyone as long as you have these two chemicals. It opens up a whole new world of fixing possibilities. I have seen YouTube content creators struggle with gluing broken bits together, clamping them for hours at a time when the job can be done in a fraction of the time. Sure, these are not the cheapest of products but they are extremely effective and drastically reduces the likelihood of your project ending in frustration.
Ubuntu is, without any dispute, the most prolific Linux distribution today. You can look at any metric and you will see that Ubuntu is number one. How did they rise to this level? I can only speculate, perhaps it has to do with the charismatic and enthusiastic visionary of Canonical’s founder Mark Shuttleworth that made Linux more approachable and attractive by the masses. Regardless, Canonical does a great job with Ubuntu. Despite any of the controversies or blunders the company makes, they are risk takers and regardless of what distribution you use, it should be applauded.
As part of the BigDaddyLinux Live challenge, we are testing the various Ubuntu flavors but for this article, I am going to focus on Ubuntu Proper, the mainline from which all the other flavors are derived. At one time, Ubuntu had their own desktop, Unity, of which they have discontinued development and now use GNOME as their core desktop.
This is my admittedly biased review of Ubuntu (Proper) as an openSUSE Tumbleweed user that prefers Plasma to all other desktops. It should also be clear that I am not a fan of GNOME at all and to use it is an absolute chore to use for me. Bottom Line Up Front, Ubuntu is pretty great and I would feel good about giving it to anyone. Regardless of my bias and preferences, Ubuntu is just a great, rock solid distribution that is a bit heaver on resources than I like but if you run a reasonably modern system, this is not an issue what so ever. If you haven’t tried Ubuntu, which would be odd that a Linux user hasn’t, or if you haven’t tried it in a while and have that restless itch, Ubuntu is worth taking around the block and maybe even on the highway to stretch it’s legs a bit.
Feel free to bail here.
One thing I can say about Ubuntu without any reservation is that it is incredibly easy to install, especially when you have a fairly straight forward installation. When the ISO boots up, you can “Try or Buy” as it were and since I don’t see a whole lot of use with a VM in just trying it without the installation process, I wanted to Install Ubuntu. The first decision is to set your keyboard layout.
The next in a line of easy decisions to make is to set your preferences for Updates and additional software. For my purposes, testing an installation, I like to see what software they bundle with the distribution. I am finding more often than not that distributions seem to be skimping out on basic computing software. It amuses me continually how people clammer for a minimal installations, especially on a desktop system where you need basic installation but maybe I don’t get it and am not Linux-ing correctly. I also selected to download updates and to install third-party software. This is one feature I do like about Ubuntu. Although adding such things in openSUSE isn’t complicated, clicking one checkbox is by far much simpler. The next page is to instruct the installer how you would like to utilize your disks and before you continue, a final sanity check will take place.
Your location in the world will be required as well as your name, computer name and if you would like to log in automatically or require a password to log in. For a VM and how I am using it, an Automatic login would not be an issue but I still chose to require a password to log in.
The installation will commence and very nicely, you can watch the details scroll by as you watch the fun highlights of the distribution like you would your uncle Fred’s vacation Slideshow during a family reunion…
The installation doesn’t take long and when complete, just a quick reboot for a fresh and exciting Ubuntu Proper experience was unleashed.
First Run and Impressions
The Ubuntu log in screen is simple and elegant with a purple field, white writing and a single user log in selection. There is nothing to detract your eyes away from the mission at hand, log in. Simple elegance.
Your first time logging into the system you are given four pages of initial preferences. You would start off with setting up any online accounts you have. For my case, I am not going to use those. Next will be an option to help improve Ubuntu. This is a nice feature and although I am a bit dubious about having anything “phone home” I am absolutely in favor of letting distribution creators know any information to help them improve the product.
Next is to set allow applications to determine your geographic location and lastly you are ready to go with some recommended applications to try out with a button to get to the Ubuntu “Software” application.
After the short guided setup, you are left with a very pleasant and release-unique desktop with a great wallpaper. I am also pleased to see you can indeed have icons on your desktop. Well done Canonical!
Next, I just wanted to click around and interact with the desktop. Just see how Ubuntu Proper does the basics like the applications menu, the system menu that contains the network, sound & session actions and the Activities features.
This is totally a personal preference thing and completely opinionated but I kind of don’t like that three basic desktop functions in different corners of the screen. I have only tested this on a single desktop VM but I can’t help but wonder how this would feel to work with on a multi screen setup. It would be annoying to have to go to different screens to get to those bits and it would also be annoying to have the title bar on all the screens. That is certainly worth further investigation.
The software center is great but a feature that I think stands out with Ubuntu is how you can tweak the software updates to your liking such as what updates you want and the frequency of checking for updates.
Since I prefer the rolling distribution model best, this wouldn’t be particularly useful to me but I really like this concept and I applaud this sort of easy access to updates as what would suite your personal preference.
The system settings is the typical GNOME settings so it is without the customization abilities as you would see on most of the other desktops. This is one of those irritating “features” of GNOME, the lack of organic ability to customize and the interface to suit your specific needs.
If you really want to customize GNOME and make it your own, you will have to install GNOME Tweaks. I find this to be less than ideal but does open up the ability to make GNOME more to your liking.
This is what basically makes GNOME the worst desktop when it comes to the mess that is the system settings. The groanings that some may give about Plasma pales in comparison to the mess that GNOME has made of their system settings. I wished that Ubuntu would fix this, just for their release but alas, they have not. I don’t know what it would take for GNOME to include the tweaks tool directly into the system settings but the fact it has been a buried (not included by default) feature for quite some time now is depressingly unfortunate.
Really, once you select Yaru-dark, this is a premium GNOME visual experience. Now it looks good and doesn’t give me a headache. Sure, if you are using LibreOffice, you still have to deal with the white block in the center but it is not nearly as painful to look at as the all white version.
Not only is LibreOffice with Yaru-dark very pleasant to look at, it also makes for a nice focus or framing of the document too. I do appreciate the the work that was done into Yaru-dark, very much, and I wish that would be an easy default to select.
Just a thing…
I noticed that Zypper was in the Ubuntu repositories and I wanted to see what would happen if I installed it. I really should have played around with it longer to see if I could get it to successfully manage the Ubuntu repositories but I didn’t get very far with it.
Having Zypper on an Ubuntu could almost push me over the edge in using Ubuntu more regularly but Ubuntu is still missing the cohesive YaST Control Center for managing system settings and such. Fortunately or unfortunately, I have become very dependent and accustomed to that suite of tools and it is kind of expected on anything that I intend on managing.
Although I did a lot more with Ubuntu than these few things, this is where I am going to leave it. This is at a length that a typical reader will just start scrolling through to see how much more nonsense is stuffed to the article and just look at pictures to see if anything grabs attention.
What I Like
Ubuntu does a great job at polishing GNOME into something much nicer than what you get from the upstream. They really take into account user experience and do the little things that count, like a functional desktop where you are allowed to place icons, even if this is something that becomes messy and unwieldy. At least you have a choice and a place to put folders to other locations in your desktop for convenience sake.
The Yaru-dark theme is fantastic. Sure, it takes a bit of digging for the un-GNOME-initiated to turn this lever but once you install the GNOME Tweaks tool and unlock the “control of your desktop achievement,” you can keep the headaches at bay and make for a more relaxing and enjoyable desktop experience. Granted, I know this is an opinion of the author and just a quick reminder the heading of this section is “What I Like”. This is a biased review, I am not a journalist!
The update control options on Ubuntu is simply fantastic. If you were to set up a system that had to remain in an unchanged state for an extended period of time, this is the place to make it happen. I can see having this adjusted for something that needed to be treated as an appliance where the system doesn’t change, outside of what would be needed for security purposes. This is an appreciated feature.
What I Don’t Like
GNOME… As much work as Ubuntu puts into GNOME, it is still frustratingly aggravating to use and adjust to suit user preferences. The lack of easy switch to the Yaru-dark theme without having to jump through hoops (okay, not really hoops) to do simple improvements is just maddening. Also, GNOME quite possibly has the worst settings of the desktops with the separation of the Settings from the GNOME Tweaks. I would be less irritated by this if Ubuntu would just include it as a subset of the Settings but the way it stands, the need to go to two different places to find what you need is just silly.
Try as I might, I do not like the top and side bars, the Unity layout, for my desktop. I find the top menu combined with the side menu an unacceptable extra use of screen real-estate. Reference my previous LibreOffice images, there is this thick bar of overhead at the top of the screen before you even get into where you do any document creation. Now, I will admit, that it is no worse than my preferred layout of having all that “admin overhead” at the bottom of the screen It is the same total loss of vertical real estate. I don’t see the value in having the icons along the side as well as the information along the top. I can’t even say for sure why you even have that “LibreOffice Writer” drop down in the top bar. Sure it’s a place to get some information but why couldn’t that be integrated into the side dock? You also can’t make the top menu bar auto hide which would be a nice feature too. I would actually prefer the top bar go away entirely and just put everything to the left side of the screen MX style as I don’t see any other practical purpose of the top bar at all. It’s just there. Perhaps it is just to what I have grown accustomed but the split of information along two sides of the screen just doesn’t work well for me.
Ubuntu is, in my estimation the best Ubuntu experience you are likely to have. Though, as I can remember, Pop!_OS is pretty great too but I haven’t given that a spin in quite a while. I do appreciate the work that Ubuntu has done to improve the desktop look and feel. It’s a great improvement from the the stock GNOME experience. They give some color and a much needed modern touch to the icons that GNOME desperately needs. The Yaru theme has a premium look to it and GTK applications should test specifically against this theme as it is likely the dominant GTK theme in Linux today.
Would I give up openSUSE for Ubuntu? No, absolutely not but I do appreciate the technology, the time and effort that goes into the polish of this distribution. I appreciate all that Canonical has contributed, the technology, the run times for Steam and Snaps but the underlying operating system is not for me. Canonical’s gift of Snaps is a technology which I use pretty regularly on openSUSE. In my estimation, Ubuntu is more of a consumer distribution that is targeted to the mass market. It is a fine product but just doesn’t provide that same comfort that I get from my tried and true openSUSE where I feel like it is more mine to work with and on.
I highly recommend, if by some off chance you haven’t tried Ubuntu in a while, to take it for a spin. Just because GNOME annoys me, doesn’t mean it will necessarily annoy you and these are just the ramblings of a Linux user that likes what he likes.
Recently, my Linksys E2000 decided it would no longer be the wireless access point I expected it to be and it had to be replaced. Thinking that maybe it just needed an update or to be reverted to the original firmware also did not solve the problem as it would just not allow any clients to access the network. No matter what I did, there was no way I could get this thing to work properly. It was time to replace it. After doing some reading and digging but ultimately taking the advice of my e-friend Mauro, I purchased an Aruba IAP-105.
The WRT54GL I pulled out of storage just wasn’t cutting it, throughput wise, even though Wireless G was pretty great some 14 years ago.
This is a nice little device and it feels like a well built unit. While handling it, the look and feel of this well crafted equipment feels like something that shouts at me “professional” or perhaps, “I was built to survive knuckle-dragger handler like you.”
Reset the router done by inserting a paperclip into the recessed hole when off and turning it on. Wait about 5 seconds for the LED indicators to flash and you are off to the races. Note that just pressing and holding the reset button does nothing when it is on.
The Access Point presented a login screen and I was unsuccessful in locating anywhere in the instruction manual the default username and password. It took a bit of digging but I was able to determine that the default username is admin and the password is also admin. I was sure to fix that default as it has been shown far too often that the defaults are left and a network is compromised.
Setting up the Access Point was so simple that it took me a bit to realize I had it set up properly with very minimal effort on my part. The effort was so minimal, I was convinced it wasn’t set up properly until I started to see the clients connect. It was amazingly easy.
Under the Network section, select New to enter a New WLAN. What is interesting here is that you have 3 options. Employee, Voice and Guest. None of which are exactly my use but home use is probably closer to “Employee” than Guest.
Next was the Client IP & VLAN Settings. In my case, I have no VLANs on my network. Maybe I should but at this time, I don’t see a need. For my purposes. I want the Client IP assignment taken care of my main DHCP server and since I don’t have a Virtual Controller, I went with the “Network Assigned” option as it seemed the most reasonable. The client VLAN assignment was left at “Default”.
The Security section was straight forward
Nothing to do with the Access section.
Once I completed it, I was a bit confused because I didn’t set the DHCP server or the DNS or anything. I wasn’t sure if I had missed something so I clicked around a while, only to discover that it took care of all of that for me.
The client info provided by the access point is very interesting. Graphs on the signal strength, connection speed and throughput of the connected devices is very interesting to see. Now, should I have issues with a client, I can look at the graphs and make a better understanding of what the issues may be. It could help me to choose a better location for the IAP in the future.
I do want to add a note that I am getting a warning that I only have 100 Mbit/s link speed on the ethernet. I am thinking this has something to do with the PoE I am using as my switch and everything connected to it is full 1 Gbit/s. A bit irritating but I will circle back on that eventually.
Once again, my network feel solid and strong. I am very happy with this purchase and buying it on eBay for about $20 made it all that much better of a purchase. The set up was far more simple than I expected and I am strongly considering getting another one so that I have access points on opposite ends of the house.
I am incredibly satisfied with this purchase. The network connection in my house is very strong and although I am slightly annoyed by the Ethernet speed, it’s probably my fault some how and I am going to work that out later.
When I first started to put fingers to keyboard with this “CubicleNate.com” thing, I didn’t ever envision it become much of anything. Just a little tool to help keep my notes somewhat organized and hope that I could provide some kind of resource to someone at some point. In late 2018, I joined the Big Daddy Linux Live community, appearing frequently on the weekly “LUG” meetings and making many new e-friends that challenged me to expand my knowledge of Linux and open source software. This has given me new things to play with and write about in Linux.
I started to produce some video content on YouTube and this site to enhance some of my content and later, I thought I would cut my teeth on a podcast of my own to talk about the nerdy things I enjoy. My reoccurring topics consist of my additional thoughts about a subject or two of the last BDLL show and an openSUSE corner but truth be told, openSUSE weaves itself throughout my “noodlings”.
In September of 2019, the formation of Destination Linux Network was announced where these well established content creators have pooled their resources to draw together their somewhat discrete communities and provide a forum for interaction in greater depth than what Telegram, Discord or YouTube can provide on their own.
As part of the launch of this new Destination Linux Network, I was asked if I was interested in starting a podcast with one Eric Adams. My immediate reaction was an absolute and resounding, “yes” to which I have no regret. The podcast is called “DLN Xtend” where we discuss a part of some of the other shows in greater depth with our own perspectives and slant on the subject. It has been loads of fun to do and I hope to continue to be a part of this as well as the Destination Linux Network for years to come.
Additionally, and not directly related, I have been able to join Dave and Yannick one of my new favorite podcasts, “Tea, Earl Grey Hot“, an unofficial Star Trek fan podcast as well as the “Ask Noah Show” where we discussed some of the merits of Microsoft and their contributions to the open source software movement.
It has been a fun ride that had has lead me to some new and interesting opportunities, not only am I blessed with being able to interact with some of the most interesting minds in Linux and open source software but it has opened up doors with other tangentially related topics.
I’d like to say I must be doing something right when I end up on a couple podcasts or perhaps it means a laps in judgment by many others. I want to thank everyone that has taken time out of their busy day to listen to these noodlings.
A few weeks ago, I was asked to be a part of the Destination Linux Network to which, without any though or consideration, seemingly on both sides, I said yes.
Started this podcast with Eric Adams called DLN Xtend. To be completely fair, he really carries the show, as you can tell by these noodlings of mine, I can barely carry myself.
I rather enjoy talking to Eric, we both geek out over so many tech topics. He has a different bend to his Linux and technology implementation views.
Sudo vulnerability Discussion
Snaps and Flatpak on openSUSE
Just a quick note, but setting up openSUSE with Snaps and Flatpak are both trivial. The great thing about openSUSE is that setting up either in openSUSE is super easy and if either not not first class citizens
Thanks to my good buddy, Eric Adams, he sent me down a rabbit hole of looking at CAD software again. A link from FossMint.com titled “11 Best CAD Software for Linux”
I have had two CAD packages that get fairly regular use. One is for “real CAD” the other is for fun.
FreeCAD is a CAD application that I use periodically, it has 3D modeling and assembly package that are pretty decent. The drawing package is pretty decent too.
LeoCAD is an application I use when I want to play with virtual Lego bricks. Often when building with my kids, I will get an idea and when I find I want different parts, I will build it in CAD and order parts as necessary.
The highlights of this article that has inspired interest and I decided to do some installing, because, why not, CAD is fun.
BRL-CAD is a free and open-source, cross-platform CAD application. There isn’t an RPM for it but there is a Debian and a tar.gz. I am going to play with this and make some kind of determination if I could use it. On the surface, the interface looks a bit like it has a steep learning curve but it might be fun give it a whirl.
BricsCAD is a commercial, modern, multi-platform CAD software for 2D and 3D modeling. The focus on this software is to allow users to work faster and smarter while spending fewer resources
The cost of this for a lifetime license with the Mechanical package is $2095 USD. That is a bit steep for a home gamer like myself. There is a 30-day trial for this software and although I haven’t tried it yet, it does look pretty fantastic
VeriCAD is another paid CAD application that does 3D modeling. This has a “freemium” business model and is much less expensive than the previous with a one time fee of 699€ and a discounted 79€ for students and universities.
I am going to take the time to check these out, just because I am very curious to see how it compares to PTC’s Creo that I use in my mechanical design career. What matters most to me is the ability to create parametric 3D models that allow for geometric constraints. I also want an Assembly package that allows for making alignments with either datums or geometric features. I have had trouble with some applications that don’t allow for this very well.
Canonical has released Ubuntu 19.10 along with it’s many flavors. It’s interesting to see what new inclusions Canonical puts into their distributions, being an openSUSE guy, and knowing largely what goes on here and what the focus is, it’s nice to see what other distros are doing.
Overall I like what I see, and I still have to finish my review of Ubuntu Proper, I think Ubuntu does a great job with Gnome. Something about the way they package it makes it much more enjoyable to use than a vanilla Gnome experience and they have been putting a lot of resources into it.
It was great seeing Alan Pope and Martin Wimpress on BDLL interacting with the community and taking in feedback on user experience. Personally, I don’t use Ubuntu on hardware directly, but I always keep a VM of it to keep myself familiarized. Ubuntu Proper, running Gnome is a far better experience in VM than it ever has historically. It’s quite obvious that they are doing something good over in Gnome land.
A lot has rolled out in the last two weeks on Tumbleweed. For the full news feed, visit news.opensuse.org as there is far too much to cover here.
The Mesa 3D graphical library was updated to 19.2.1 which brought several new features and a big RADV performance boost for AMD GPUs. VirtualBox hypervisor for x86 had a minor update to version 6.0.14 which fixed some potential networking with interrupt signaling for network adapters in UEFI guests. OpenSSH 8.1 had a major upgrade that included new features like experimental lightweight signature and verification ability.
KDE Plasma version 5.17.1 arrived with KDE Frameworks 5.63.0. The bug fixes that stand out the most to me on this is to KScreen as with 5.17 there were issues of not all the displays being represented in the Display Configuration tool forcing me to use ArandR instead. Kwin received some fixes, the Plasma Desktop Mouce KCM fixed the X11 mouse acceleration profile. Also, if you are running a touch screen device without a keyboard or with limited keyboard use, you may want to try Wayland again with this version of Plasma. It functions so much cleaner. I am using the Wayland not the “Full Wayland” desktop.
YaST, the greatest system administration and maintenance tool I have ever used, received updates to the Firstboot, Installation, Storage-NG and xml packages. I would like to see other distributions adopt YaST as part of their system configuration suite. Having that cohesive collection of tools is hugely valuable.
The Tumbleweed reviewer gives 20191024 a stable score of 93; 20191025 a stable 96; 20191027 a stable 98 and 20191028 a stable 94.