Outside The Cubicle | DeWalt 20v Max Cordless Router

After purchasing my core set of DeWalt 20v MAX cordless tools and selling off the previous platform I used, I “needed” to replace some of those capabilities. One such tool is a router. In fairness, I had a rotary tool I was using as a router. Although it did the job fairly well, it lacked a proper base. This DeWalt cordless router is a proper router with a nice sized base and therefore a substantial upgrade.

Bottom Line Up Front: For the projects I do, this is a necessary tool. The depth of cut adjustment system along with the speed selection dial and the concentration of thought in engineering the grips is not lost on me. I don’t know that I have my money’s worth out of it yet but I have certainly been able to fabri-cobble the things together as I have imagined because of this. I would call this a luxury tool, I could probably find another way to router corners, not as nicely, but it is certainly possible. I also have not a bit of buyers remorse for this purchase. I do keep it fairly busy.

Unboxing

I purchased, the bare tool, on eBay at a bit lower than retail, because, I am pretty cheap. I didn’t open it up right away because I didn’t have an immediate job for it but I did have in the queue. I do appreciate how they packaged this. Simply done and well protected.

This box included, router, basic fixed base, collet, wrench and a very nice manual. This includes all the basic features, component definitions and obligatory warnings.

If this is your first time using a router and you are unfamiliar with its operation, this is a good manual to dig into. There really isn’t much. The key features of this are the power switch, speed adjustment, depth adjustment, and so forth.

Tool Use

The main purpose for the purchase of this tool is to router the edges of things when I am building furniture, stairs, railing, Lego tables, etc. This is not one of those “must have” tools for getting tasks done, this is more of a “last 10%” type of a tool. Is it necessary I router the edges of my Lego Table or hand railing? No, but it really makes a difference as to the quality of the final product. With the recent bit of shelving I built, I didn’t need it but the hand railing on some stairs I put together, very much necessary.

The argument for going corded vs cordless is the added battery weight. The battery does add some weight to the top of the tool but since the industry move to Lithium Ion chemistry the weight is a non-issue. I am using the larger 10 cell batteries but you could very easily use a smaller 2 Ah, 5 cell battery pack or the somewhere-in-between, 3 Ah, 5 cell pack.

For the simple radius edges I have put on the various things, it has never been clumsy to handle and not having a power cord get in my way to maneuver around has been a significant benefit. The more I use cordless tools, especially those from DeWalt only further inspires my desire to grow the collection of compatible cordless tools.

Battery Life

There is a valid argument for why not just get the corded variety and you don’t have to worry about battery life. That is a good argument if you only work in the confines of a shop or garage. The nature of much of the work I do with hand tools is often outside of the confines of a shop and often away from an outlet. More often than not I am working out of the back of my truck with the tailgate as my workbench. That said, I haven’t actually used up a 4 Ah battery for any given project, every time the battery was moved to another tool with a lot of life left on it. I should also not, using my tools as often as I do, a 4 or 5 Ah battery will typically last me hours for most tasks.

What I Like

For starters, the size of this is router is perfect for the tasks I do. It is just the right diameter to comfortably hold and guide along the edge of a project. Also, it very easily fits nice and neatly into my tool bag along with my jig saw, circular saw and reciprocating saw.

The fit and finish of this router feels great. It is the right mass which gives the impression it is well built. Adjusting the depth of cut is a smooth action which further feeds into the impression of a highly refined, quality product.

The speed control dial and switch are conveniently at the top of the tool by the battery, away from your fingers as you grip the router, so accidentally adjusting the speed or shutting it off while in use is not very likely. The component choices for the switch and dial were well made. It will be interesting to see how they hold up long term but for the time being they feel and function exceptionally well.

Lastly, and most importantly, the fact the router is cordless is my favorite feature. I am quite pleased with the freedom from wires when maneuvering this router. Not having a crisscross of extension cords to trip over is worth the extra expense of the battery powered model.

What I Don’t Like

I don’t like that I don’t have the larger plunge base with the two knobby handles. Although everything I have made so far can be done with the more compact base, the larger base would make it easier and more secure to handle, especially when additional control is needed. This can very easily be purchased and will likely be an upgrade at a later time. Outside of having two hands to control the path of the router, the ability to plunge and retract the cutter has great benefits.

Plunge Base for Compact Router

I realize, there isn’t an actual criticism for the router itself. I truly do not have one. It’s a fantastic piece of kit.

Final Thoughts

Although I am quite happy with this tool, I am not sure I have used it enough to say it was worth the $160 expense. At the same time, there are a number of things I have done that would not have been possible otherwise so I am not at all unhappy with the purchase. The router feels and operates like a well built machine.

At some point, I need to purchase the plunge base. There have been a few instances where the additional control would have made my life easier but this is a further luxury for an already luxury tool. I could also use more router bits for this router. I have one bit that I have used for everything. It is time to add to this collection and get some kind of variety pack.

I don’t recommend that everyone needs a router in their toolkit. However, if you have any inclination to do more detailed wood working, build table tops and the like, this a very welcome tool to have.

References

DeWalt 20v Max XR Brushless Cordless Compact Router
DeWalt 20v Max XR Brushless Cordless Compact Router Manual
DeWalt compact plung base

Noodlings | KDE Plasma 5.19, Partition Manager and a BADaptor

Really kicking it in to 3rd gear… not high gear yet.

15th Noodling of nonsense

KDE Plasma 5.19 Experience

It is another fantastic release with much attention being made to the finer details that enhance the usability experience without taking away from any of its functionality.

KDE Partition Manager

I have become quite the fan of Gparted over the years of my Linux life and I started wondering if there were other partition management options out there. Specifically one that is Qt based instead. This is not a light on GTK based applications, I just find that they don’t tend to look as nice and clean as Qt apps. In this off-hand search, I stumbled upon PartitionManger which is in official openSUSE Tumbleweed and Leap Repositories.

openSUSE Tumbleweed on an HP Zbook 15 G2 with Nvidia Quadro K2100M

I have reached the end of the road with this machine. We have been together for about three years and before sending it off to the ether, I wanted to try out openSUSE Tumbleweed on it. It was something of a question I have been asking myself since I was first assigned the piece of hardware. Windows 7 worked fine on it but how would it spin with the Plasma desktop.

Badaptor, DeWalt 20v MAX battery to Ryobi 18v One+

In 2019, I bought into DeWalt 20v MAX cordless tool platform as part of my mission to reduce complexity in and improve efficiency in as many aspects of my life as possible. This is a long term mission of mine with many facets but basic tools was at the foundation of this plan. DeWalt has a great line of tools to choose from, but they are aimed at the commercial, industrial or professional builder. I would consider myself an intermediate or advanced DIY-er with the occasional moonlighting as either a handyman or builder, so I wanted some of those higher end tools to be available.

BDLL Follow Up

UbuntuDDE Discussion

UbuntuDDE Review from an openSUSE User on CubicleNate.com

openSUSE Corner

  • Leap 15.2 upcoming release in only 7 days. One week from today
  • openSUSE + LibreOffice Conference Updates
    • https://news.opensuse.org/2020/06/17/opensuse-libreoffice-conference-update/
    • Organizers of the openSUSE + LibreOffice Conference have been slightly adjusted the conference dates from the original dates of Oct. 13 – 16 to the new dates of Oct. 15. – 17.
    • The new dates are a Thursday through a Saturday. Participants can submit talks for the live conference until July 21 when the Call for Papers is expected to close.
    • The length of the talks for the conference have also been changed. There will be a 15-minute short talk, a 30-minute normal talk and a 60-minute work group sessions to select. Organizers felt that shortening the talks were necessary to keep attendees engaged during the online conference. The change will also help with the scheduling of breaks, social video sessions and extra segments for Questions and Answers after each talk.

Tumbleweed

https://review.tumbleweed.boombatower.com/

  • 20200611 Stable 98
    • Alsa 1.2.2 -> 1.2.3
    • ffmpeg-4 4.2.2 -> 4.2.3 – Stable bug fix release, mainly codecs and format fixes
    • ncurses 6.2.20200502 -> 6.2.20200531
    • yast2 4.3.5 -> 4.3.6
    • 20200612 Moderate 72
    • iwlwifi broken in kernel-5.7.1
    • NVIDIA kernel module broken release
  • 20200614 Unstable 66
    • zypper dup from 20200609 to 20200614 and run into an infinite boot loop: https://paste.opensuse.org/89998412
      Hardware: Processors: 12 × Intel® Core™ i7-9750H CPU @ 2.60GHz Memory: 15,4 GiB Arbeitsspeicher Graphics Processor: Mesa DRI Intel® UHD Graphics 630
    • This was probably due to the move to GCC10
  • 20200615 Moderate 71
    • Fix building with gcc10
  • 20200616 Moderate 73
    • plasma-framework 5.70.0 -> 5.71.0
  • 20200617 Moderate 74
    • zypper (1.14.36 -> 1.14.37)
    • Mesa (20.0.7 -> 20.1.1)
  • 20200618 Pending moderate 74
    • PackageKit
    • flatpak
    • plasma5-thunderbolt
  • 20200621 Pending moderate 79
    • plasma5-workspace (5.19.0 -> 5.19.1)
    • snapper (0.8.9 -> 0.8.10)
  • 20200622 Pending moderate 78
    • gnome-desktop (3.36.2 -> 3.36.3.1)
    • libreoffice (6.4.4.2 -> 7.0.0.0.beta2)

Computer History Retrospective

Computer Chronicles – Computers in Education (1983)

Fear of computers replacing teachers and dehumanizing education
– I think in many ways this has happened but in a way, with the changes in multimedia, as opposed to the beeps and boops of computers in 1983, we have humanized computers a bit. With individuals creating tutorials and education personalities you can follow online have made more educators out of us as opposed to less
– Terminal becomes a kind of personal tutor
– Time at the terminal is more like a game
– Computer instruction was more like rote training
– Kids trained in logic
– Logo whimsical way to tell a computer what to do taught

Final Thoughts

If you are going to spread anything, make it love, joy and peace. You can’t ever go wrong with that

Noodlings | LeoCAD, DeWalt and a UPS

Dusting off for the 14th installment.

14th Noodling of nonsense and clamoring

LeoCAD from Design to Publication

Designing, organizing the timeline and publishing a MOC (My Own Creation) on Rebrickable.com using LeoCAD on openSUSE

DeWalt cordless Power tool platform

A little trip outside the cubicle for my appreciation for a great cordless tool platform that enables me to do more with greater efficiency. My mission to simplify and reduce life complexity

APC UPS Battery Backup Rebuild

Fixing is my preferred option to buying new. Not only is it financially but environmentally more beneficial.

BDLL Followup

Thoughts about Lubuntu and Linux Mint choice to forbid Snaps.

openSUSE Corner

openSUSE + LibreOffice conference will be online. See the news article for details on on the Open Source Event Manager system, the online Summit and submitting for talks for it.

Tumbleweed Updates for snapshots 20200609 and 20200610, both trending stable scores.

Snapshot Reviewer Site

Computer History Retrospective

In the 5th episode of the 1st season of Computer Chronicles in the year 1983 was an episode about Robotics. Lots of interesting speculation about the commercial viability of robotic devices.

Even at this time, robotics in manufacturing, or machines in general were starting to do many of the more dangerous tasks that could easily be replaced by some sort of structured process where robots could excel.

The fear of robots taking away jobs as seen in the early 20th century but the speculation that robots would completely eliminate all jobs doesn’t seem to have come into fruition. I know that today we speculate that automation will replace us in every way. It has in some capacities but I do believe it opens up the world for more skilled occupations. Robots and computers are certainly very disruptive to society, but they also give us new things as well.

Here is the video in it’s video tape recorded glory from 1983.

Final Thoughts

We all have immutable characteristics, things about us we cannot control about us. That will never make you less of a person

Outside the Cubicle | DeWALT 20v Max Cordless Tool Platform

Outside of the Linux thing and retro tech hobbies of mine, I like to build things and generally improve my domicile so I enjoy tools, especially cordless power tools. Not having that tether to the wall has a kind of freedom to it that makes working with your hands much more enjoyable. I have been using cordless tools in the form of the Porter Cable 18 volt line for about 10 years. It has been a fantastic platform of cordless tools but unfortunately, it was the decision by the company to abandon the 18 volt line and move to this 20 volt Max line without an upgrade path. I stuck with the Porter-Cable tools for quite a while but in the last year or so, the batteries were all giving out. No batteries were available in the stores anymore so I bought some knock off batteries on eBay. I had to repair both of them after using them due to a manufacturing flaw but that was the deciding factor that I could not continue to stay with the Porter-Cable 18v line of tools.

Did a lot of research online, wanted to hear harsh opinions of all of the tools, read or watch anything that told me the good and the bad with every aspect I could fine. I wanted a tool I could afford but one I could rely on with a broad selection of tools and a non-restrictive technology. I wanted to have some level of trust for the intentions and motivations of the company that owns the brand. After all of my searching, studying and evaluating each of the value propositions, I landed on DeWALT.

Value Proposition

How I ended up on this decision. Keep in mind, this is an evaluation of what I value that works best for me. This is not universal to all people, nor should you take this as a recommendation that works best for you. You will have to determine this for yourself using your own value proposition wheel.

Durability

I need tools that will handle my level of abuse. I do try to be careful with them and I do keep them clean but I am not exactly good at preventing me from happening to my things. I am prone to drop, kick, knock off high places and so forth my power tools. I need things that can survive my usage. Based on my contractor friends’ preferences. DeWALT tends to be their preference. Though, my plumber friends tend to go Milwaukee for some of their plumbing specific tools, I don’t have Milwaukee money.

Variety of Tools

The next most important aspect of my choice was to have a large variety of tools to remove complexity in accomplishing tasks in my life. My time is limited and I need to maximize efficiency whenever possible (side note, much of the reason I use Linux and specifically openSUSE but that is another discussion for another time). Suffice to say, I want options, lots of options and DeWALT has the best score here for my preferences. I also want the ability to use easily use batteries with other tool platforms (supported or not). Since DeWALT is a popular platform, there are many hacks out there so that is also a big win.

Battery

It was a absolutely a necessary requirement to have options for large capacity batteries for higher draw tools. I don’t like extension cords. Sure, that is the universal power source but it is also very inconvenient and I tend to mangle my extension cords over time. In this are, DeWALT really fit the bill. Not only do they have their 20 volt Max line with 6 Amp Hour batteries but they also have batteries that will flip to 60 volts (actually 54v nominal) for a chain saw, table saw, and a miter saw. These vast options bolstered my decision to go with the 20 volt Max platform.

As an aside, Makita cordless tools batteries had the high capacities but should I choose to refurbish them with new cells, they would no longer function. This would not work for me. Milwaukee arguably have the best battery in the business and the price reflects it.

Commitment of Long Term Support

My experience with the 18 Volt Porter-Cable line was good, but within 4 years they started their transition to the 20 Volt Max along with their DeWALT and Black & Decker counter parts. Unlike DeWALT, there was no provided upgrade path. Had I bought into DeWALT 18 volt line years ago, I could have upgraded batteries over time and slowly transitioning to the 20 Volt Max line. I wanted to have some kind of corporate commitment or at least the perceived commitment that I would be able to use these tools for many, many years. Based on the rate of expansion of the tool line, there is some sort of engineering and product development commitment and therefore, it is likely to be around for a while.

Based on these three bits of criteria plus the bonus if it being “manufactured in the USA with globally sourced materials” I decided that DeWALT would be my best decision. It hit with the highest marks on all parts.

The First Purchase

I was at Lowe’s to get materials for a project and I saw there was special on DeWALT Tools. What cought my eye was a 10-pc tools set, last one and when I did the math, I would spend less than $60 per tool, factoring the two batteries and charger, it appeared to be a spectacular deal for DeWALT. Buying so many, tools at once meant I could completely change over my cordless platform. I am not going to give a full review on each component, just the highlights and drawbacks.

Drill

This model has brushed motor, feels good in the hand, slightly smaller, faster and more powerful than the 10 year old Porter-Cable 18v cordless drill. A nice feature of it is the work light in the front turns off after approximately 20 seconds after you release the trigger.

The anti-feature of this drill is the speed selector switch is a bit ropey. The one and only feature that is lack luster. This would have been a top-of-the-line drill 10 years ago but today, there are many better options.

Impact Driver

This model has a brushed motor and is much more compact than the Porter-Cable 18v equivalent model. The 3-LED front work light with similar delayed turn off feature makes this fantastic for working in dimly lit areas, which seem to be the work environment I end up more frequently than not.

The anti-feature of this is that although more compact than what I have been used to, not as much as I have seen and a brushless motor would be nice, even if not necessary.

Reciprocating Saw

This is the larger, brushed motor model, feels beefy in the heads and is a bit weightier than the Porter-Cable 18v unit it was replacing. It looks and feels like it will take more of a beating than it is likely to get in my possession.

The anti-feature is that it is longer and heavier than what I would like but it’s really not worth complaining about as this isn’t a tool for which I am likely to put a ton of hours.

Circular Saw

This is the brushed motor model with the 6-½” blade. It is well balance and the over all use and feel of it is quite satisfactory. This has seen many linear foot of wood travel past it’s spinning teeth. Since I have used it quite a lot I can confirm that it does the job very well.

The Anti-Features of this tools is that the chips from cutting wood somehow seem to jump into my face more than my previous Porter-Cable model, it also lacks a laser guide and a 7-¼” blade would have been preferred. This also does not have a laser guide like you would see on some brands as standard.

Angle Grinder

This tool is very similar to the Porter-Cable 18v unit it has replaced. Although I haven’t heavily used this tool, it has chewed through many pipes and nails. I like how the design of the tool has a built in hand guard.

The anti-feature is that it has a slightly slower maximum rotational speed (RPMs) than my previous cordless unit but it seems to perform similarly. No complaints here.

Oscillating Multi-tool, XR model

This is the brushless motor model and at first, I didn’t like the trigger vs switch as compared to the Porter-Cable equivalent. After actually using it, I found that the trigger with the lock was more ergonomic and ultimately easier to use. It also has a very bright work light in the front with a similar delayed shut off.

Anti-feature, the learning curve for this different switch mechanism but I wouldn’t change this.

Blower

I have used this for numerous functions around the house besides blowing sawdust off of my projects. It’s great for clearing the driveway and the front porch. I have also used it to inflate an air mattress or exercise ball more than once. It isn’t loud and painful on the ears like some air pumps.

Anti-features, it could be more powerful and have a longer nozzle attachment but that would likely put it in another class of blower so I will not complain about this either.

Vacuum, DCV517

This could almost be my favorite tool in the pack and it is the one that gets used nearly every day. I have found that this vacuum is not only great for cleaning up your work, the tools after getting them dirty but also great for quick cleanups around the house and in my truck. The detachable hose makes it very useful for cleaning up dust bunnies in corners, or on ceiling fan blades and when paired with round brush attachment makes quick work of cobwebs between the floor joists or cleaning underneath the couch cushions. It should also be noted that this is a wet/dry vacuum, of which I have used it for both.

Anti-feature, it could suck with a bit more force but considering the size of it, I believe it to be adequate.

Bluetooth Speaker

It’s a nice portable speaker that I pair with my computer, usually my Dell Latitude E6440 and listen to podcasts while I work around the house. The KDE Plasma Bluetooth module had no issues pairing and remember this device (the Linux tie-in). I find that this one gets a lot of use too. Also, with the Plasma Media Integration, starting and stopping the podcast or YouTube video playing on Firefox worked perfectly. Additionally, I could use my phone to stop the media playback using KDE Connect. Pretty fantastic.

Anti-feature, it could be louder.

Flashlight

Frequently, this is considered the “throw off” or “sandbag” item, and I can agree to that with some sets but this is a nice flashlight and also gets a lot of use, mostly by my kids. The pivoting head is great for setting it in a particular direction to light up your work.

Anti-feature, it could be brighter or have an adjustable focus.

Summation

These are not DeWALT’s finest tools by a long shot but spending about $60 per tool, I would say that it was quite worth it. Admittedly, the flashlight isn’t worth $60 but as a package deal, very worth it. There really is only one tool for which I am not completely satisfied and that would be the drill. I knew this going into it and I wasn’t about to drop the coin on having a set that consisted of nothing but the top of the line XR tools as I don’t use them enough to warrant that.

Tools that I like most in the set

Impact Driver – The key feature of the impact driver I like most is how compact it is and the three LEDs on the front of it. It feels good in the hand when pared with a 5 cell battery and spectacularly drives screws into stubborn materials.

Vacuum – Although not exactly a tool someone is likely to seek out, this is the tool that gets the most use in my house, day in and day out. It is a wet dry vacuum that really sucks. I have used it more for cleaning dust bunnies, crumbs and floor dirt than anything else but with the hose being an integral part of the tool, makes this fantastic for quickly cleaning up the messes of life. This has done more to simplify and improve efficiency of my life than any of the other tools in the group.

Blower – As odd as it may sound, this cheap tool has been used a lot. Everything from blowing leaves, cleaning grass off the sidewalks to inflating exercise balls (darn thing had a leak).

Tools I Don’t Like as Much

It is not that I am disappointed with anything it is just to give an honest bottom three in this 10 piece tool set ranked from least to most disappointing.

The Reciprocating Saw is fine, very powerful and also quite heavy. It is better than the 18 volt Porter-Cable model I had but also, having held the XR line of more compact Reciprocating Saws by DeWALT makes this one feel a lot more like last decades technology.

The Circular Saw, it’s really quite decent but it as such that I feel like I get hit in the face with wood chips / dust more often because the saw blade and motor are opposite to what I am most accustomed. Also, it is a 6 ½” blade as opposed to the 7 ¼” blade that is standard on typical corded circular saws. This saw feels a lot like the 18 Volt Porter-Cable but a mirrored version of it.

The drill, although not bad and better than the Porter-Cable Drill that I loved so dearly for a decade is probably the least thrilling of the bunch. I only say this because of the XR line of brushless cordless drills available. Those are something special, this is just, meh.

Of these bottom three, the drill needs to be upgraded for me to be happy with the tool set. I could get along fine with this drill but I would rather move this drill into the kitchen as a hand mixer and have a better compact XR drill for making and fixing things.

Amendment to Cordless System

This is just may be me, but the cornerstone tool of any kit is the drill and before I actually left the store, I had already made up my mind that I needed to get a second drill anyway. The drill I ended up purchasing, on eBay, was the DeWALT DCD791, a part of the XR Line with an extremely bright work light light on it, just above the battery. There are three settings to the work light. Dim, Bright and super bright. The “Super Bright” also has 20 minute delay on it so you can pull the trigger. set the drill down and brighten the dim corner you are working for quite a while. This is super, super handy. No regrets on that $80 purchase.

The second tool that I also needed to have the tool set complete enough for my next series of tasks was a hammer drill. I ended up getting this DCD996 Hammer Drill. My mistake that I made was purchasing it without the side handle. The performance of it is to my satisfaction and it too has that very handy three setting light system. In a pinch, you can set these drills up around you to brighten something up.

DeWALT 2, 3, 4 Ah BatteriesAlso purchased two, 4 Amp Hour batteries because the two, 2 Amp Hour batteries were not sufficient. Lowe’s also had a buy one get one deal going so I purchased another charger with a 3 Amp Hour battery.

I found that I was ripping through batteries pretty quickly with only having two, 2 Amp Hour batteries. Having the additional batteries made it possible to always have at least one charged and ready to go and one sitting in the vacuum.

Where to from here

This was the first phase in my goal for simplification for my project tasks. Not just for fixing, building and making but also for general operation to include cleaning and maintaining my domicile. Little things like a vacuum at the ready with batteries in reserve has made my life a lot better. The next steps were to replace my aging 18v Line of Black and Decker outdoor tools as well as replace my mower with a DeWALT cordless variety.

See this article on DeWalt 20v Max Cordless Router

Final Thoughts

There have been many times when I have made purchases that I have regretted shortly after. That is not the case at all with this 10 piece tool set. After selling off my old tools the difference would have been about the coast of new batteries. Surprisingly, 10 year old cordless tools hold their value pretty well.

I am very glad I purchased a few extra batteries as it allows me to rotate through and always have a battery on hand. I have subsequently put in several hours of use on each of the tools I have briefly described here. They have all performed to my satisfaction, even the lack-luster drill has been used pretty heavily. I have made several mean pots of mashed potatoes with it.

I am not sure where I am going to go from here. I have no intention of doing any work to failure videos or tests as there is no way I would get any value out of that. I may focus on more interesting tools at a later date on if it suites me. I can guarantee that some of these above will make cameo appearances on future things as they are very often in supporting roles.

Tools are very much a necessity in many, many aspects. They are force-multipliers in chores and tasks which consequently make life more efficient and help to make my time in this fallen world a bit more enjoyable. A quality tool is never (maybe rarely) a wasted purchase and from what I can tell, I have purchased quality tools that have, so far, held up quite nicely.

References

Lowe’s 10 pc tool set product information
DeWALT Tools
KDE Connect Article on CubicleNate.com